View G133IGE-L03_7553657.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

product specifica t ion v e rsion 1.0 6 april 201 1 1 / 27 the c o py ri g h t bel o ng s t o c h i m ei i n no lu x. any u n aut h o r i zed use i s p r o h i bi t e d. customer: approved by signa t ure n a m e / t i t l e note please ret u rn 1 copy for your confirmation with y our signature and comment s. t ent ati v e s pecifi c ation preliminary s p ecification approval s pecifi c ation model no.: g133ige suffix: l03 ??-???? 3?a ?f?? |a ?2? 2011-04-13 15:26:37 appl 2?~ot2z3b yuhsi ang.chang ( i3?? /514-10922) director accept for more informa tion: az displa ys, inc. 75 columbia, aliso viejo, ca 92656 http://www .azdispla ys.com
product specification version 1.0 6 april 2011 2 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. - contents - revision history ------------------------------------------------------- 3 1. general description ------------------------------------------------------- 4 1.1 overview 1.2 features 1.3 application 1.4 general specifications 1.5 mechanical specifications 2. absolute maximum ratings ------------------------------------------------------- 6 2.1 absolute ratings of environment 2.2 electrical absolute ratings 2.2.1 tft lcd module 2.2.2 led converter 3. electrical characteristics ------------------------------------------------------- 8 3.1 recommended operatin condition 3.2 backlight unit 4. block diagram ------------------------------------------------------- 11 4.1 tft lcd module 5. input terminal pin assignment ------------------------------------------------------- 12 5.1 lvds i/o pin assignment 5.2 backlight pin assignment 5.3 timing diagram of lvds input signal 5.4 color data input assignment 6. interface timing ------------------------------------------------------- 16 6.1 timing characteristics 6.2 power on/off sequence 7. optical characteristics ------------------------------------------------------- 18 7.1 test conditions 7.2 optical specifications 8. reliability test ------------------------------------------------------- 21 8.1reliability test condition 9. packaging ------------------------------------------------------- 22 9.1 packing specification 9.2 packing method 10. defintion of label ------------------------------------------------------- 24 10.1 cmi module label 11. precautions -------------------------------------------------------- 25 11.1 assembly and handling precautions 11.2 safety precautions 12. mechanical characteristics ------------------------------------------------------- 26
product specification version 1.0 6 april 2011 3 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. revision history version date section description ver 1.0 apr. 6, ?11 all G133IGE-L03 preliminary specification was first issued.
product specification version 1.0 6 april 2011 4 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 1. general description 1.1 overview G133IGE-L03 is a 13.3? tft liquid crystal display module and 20 pins lvds interface. this module supports 1280 x 800 wxga mode and can display 262k or 16.2m colors. the converter circuit for led is built in. 1.2 features - wxga (1280 x 800 pixels) resolution - lvds (low voltage differential signaling) interface - led light source 1.3 application - industry application 1.4 general specificati0ns item specification unit note diagonal size 13.3 inch active area 286.08 x 178.8 mm bezel opening area 289.1 x 181.8 mm (1) driver element a-si tft active matrix - - pixel number 1280 x r.g.b. x 800 pixel - pixel pitch 0.2235 x 0.2235 mm - pixel arrangement rgb vertical stripe - (2) display colors 262k or 16.2m color - display mode normally white - - surface treatment anti-glare, hard coating ( 3h ) - - module power consumption (6.5) w typ. note (1) please refer to the attached drawings for more information of front and back outline dimensions. note (2) 1.5 mechanical specifications
product specification version 1.0 6 april 2011 5 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. item min. typ. max. unit note horizontal (h) 298.5 299 299.5 mm vertical (v) 194.5 195 195.5 mm module size depth (d) - (7.4) (7.9) mm (1) weight - (365) (380) g note (1) please refer to the attached drawings for more information of front and back outline dimensions.
product specification version 1.0 6 april 2011 6 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 2. absolute maximum ratings 2.1 absolute ratings of environment value item symbol min. max. unit note operating ambient temperature t op -30 +70 oc storage temperature t st -30 +80 oc note (1) temperature and relative humidi ty range is shown in the figure below. (2) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (3) no condensation. -40 relative humidity (%rh) operating range temperature (oc) 100 80 60 -20 40 0 20 80 40 60 20 storage range 100
product specification version 1.0 6 april 2011 7 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 2.2 electrical absolute ratings 2.2.1 tft lcd module ta = 25 2 oc value item symbol min. max. unit note power supply voltage vcc (-0.3) (4) v (1) 2.2.2 led converter value item symbol min. max. unit note converter voltage v i (4.5) (24) v (1) , (2) enable voltage en --- (5.5) v backlight adjust adj --- (5.5) v note (1) permanent damage to the device may occur if maximum values are exceeded. function operation should be restricted to the conditions desc ribed under normal operating conditions. note (2) specified values are for led converter (refer to 3.2 for further information).
product specification version 1.0 6 april 2011 8 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 3. electrical characteristics 3.1 recommended operation condition ta = 25 2 oc value parameter symbol min. typ. max. unit note power supply voltage vcc (3.0) (3.3) (3.6) v - permissive ripple voltage v rp (50) mv - rush current i rush (1.5) a (2) initial stage current i is (1.0) a (2) white (330) (370) ma (3)a power supply current black icc (450) (490) ma (3)b lvds differential input high threshold v th(lvds) (+100) mv (4), v cm =1.2v lvds differential input low threshold v tl(lvds) (-100) mv (4) v cm =1.2v lvds common mode voltage v cm (0.7) (2.0) v (4) lvds differential input voltage |v id | (100) (600) mv (4) terminating resistor r t (100) ohm note (1) the assembly should be always operated within above ranges. note (2) measurement conditions: r1 (high to low) (control signal) +12v sw q2 c1 1uf vcc vcc 2sk1470 q1 2sk1475 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (lcd module input) vcc rising time is 470 s 470 s vcc gnd 0.9vcc 0.1vcc
product specification version 1.0 6 april 2011 9 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. note (3) the specified power supply current is under the conditions at vcc = 3.3v , ta = 25 2 oc, f v = 60 hz, whereas a power dissipation check pattern below is displayed. note (4) the parameters of lvds signals are defined as the following figures. active area a. white pattern active area b. black pattern 0v v cm | v id | single ended 0v | v id | v th ( lvds ) v tl ( lvds ) differential
product specification version 1.0 6 april 2011 10 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 3.2 backlight unit ta = 25 2 oc value parameter symbol min. typ. max. unit note converter power supply voltage v i (10.8) (12.0) (13.2) v converter power supply current i i --- (0.43) --- a @ vi = 12v (duty 100%) converter power consumption p led --- (5.16) --- w @ vi = 12v (duty 100%) backlight on (1.6) --- (5) v en control level backlight off (0) --- (1) v pwm high level (1.3) --- (5) v pwm control level pwm low level (0) --- (0.65) v pwm control duty ratio (10) (100) % pwm control frequency f pwm (100) (200) (10k) hz led life time l l (30,000) hrs (2) note (1) led current is measur ed by utilizing a high frequency current meter as shown below: note (2) the lifetime of led is defined as the time when it continues to operate under the conditions at ta = 25 2 j and i led = 20ma dc (led forward current) until the brightness becomes 50% of its ?? original value. note (3) please note that led life will be shorter than t he average life described in the specification if operate in higher ambient temperature. power supply converter led backlight unit vi , ii gnd input power pi
product specification version 1.0 6 april 2011 11 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 4. block diagram 4.1 tft lcd module tft lcd panel (1280x r.g.b.x800) data driver ic scan driver ic lvds input / timing controller dc/dc converter & reference voltage v i frc rx3(+/-) rx0(+/-) rx1(+/-) rx2(+/-) clk(+/-) vcc_in gnd input connector (hirose-df19kr-20p-1h) led converter led backlight unit converter connector (e&t 3808k-f05n-03l)
product specification version 1.0 6 april 2011 12 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 5. input terminal pin assignment 5.1 lvds i/o pin assignment pin symbol description polarity remark 1 vss ground 2 vcc power supply +3.3 v (typical) 3 vcc power supply +3.3 v (typical) 4 nc non-connection 5 frc dithering control setting when frc=h, the width of data input 8 bits when frc=l, the width of data input 6 bits and set dx0 and dx1 to logical low (default is l) h is 3.3v l is gnd 6 rxin3- lvds differential data input negative 7 rxin3+ lvds differential data input positive 8 rxin0- lvds differential data input negative 9 rxin0+ lvds differential data input positive 10 vss ground 11 rxin1- lvds differen tial data input negative 12 rxin1+ lvds differential data input positive 13 vss ground 14 rxin2- lvds differential data input negative 15 rxin2+ lvds differential data input positive 16 vss ground 17 clk- lvds clock data input negative 18 clk+ lvds clock data input positive lvds level clock 19 vss ground 20 vss ground note (1) user?s connector part no.: df19g-20s-1sd (hirose) or equivalent df19g-20s-1for df19g-20s-1c 5.2 backlight pin assignment (converter connector pin) pin symbol description remark 1 vi converter input voltage 12v 2 vgnd converter ground ground 3 en enable pin 3.3v 4 adj backlight adjust pwm dimming (hi: 3.3vdc, lo: 0vdc) 5 nc not connect ground note (1) user?s connector part no: e&t h208k-p05n-02b or equivalent
product specification version 1.0 6 april 2011 13 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 5.3 timing diagram of lvds input signal
product specification version 1.0 6 april 2011 14 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 5.4 color data input assignment the brightness of each primary color (red, green an d blue) is based on the 6-bit gray scale data input for the color. the higher the binary input, the brighter t he color. the table below provides the assignment of color versus data input. ( 0: low level voltage, 1: high level voltage) data signal red green blue color r5 r4 r3 r2 r1 r0 g5 g4 g3 g2 g1 g0 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0) / dark red(1) red(2) : : red(61) red(62) red(63) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0) / dark green(1) green(2) : : green(61) green(62) green(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0) / dark blue(1) blue(2) : : blue(61) blue(62) blue(63) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1
product specification version 1.0 6 april 2011 15 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. the brightness of each primary color (r ed, green and blue) is based on the 8-bit gray scale data input for the color. the higher the binary input, the brighter the color. the table below provides the assignment of color versus data input. ( 0: low level voltage, 1: high level voltage) data signal red green blue color r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0) / dark red(1) red(2) : : red(253) red(254) red(255) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0)/ dark green(1) green(2) : : green(253) green(254) green(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0) / dark blue(1) blue(2) : : blue(253) blue(254) blue(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1
product specification version 1.0 6 april 2011 16 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 6. interface timing 6.1 timing characteristics the specifications of input signal timing are as the following table and timing diagram . signal item symbol min. typ. max. unit note dclk frequency 1/tc (50) (71) (80) mhz - vertical total time tv (810) (823) (1023) th - vertical addressing time tvd (800) (800) (800) th - horizontal total time th (1360) (1440) (1800) tc - de horizontal addressing time thd (1280) (1280) (1280) tc - input signal timing diagram t h t c dclk t hd t vd t v de de data
product specification version 1.0 6 april 2011 17 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 6.2 power on/off sequence to prevent a latch-up or dc operation of lcd assembly , the power on/off sequence should be as the diagram below lvds vcc vi 10% 90% t2 t1 t3 0.1vcc 0.9vcc 0.9vcc 0.1vcc t4 valid t7 0.9vi 0.9vi 0.1vi 0.1vi pwm dimming t9 10% 90% t8 bl on/off t5 10% 90% t6 power on/off sequence note (1) please avoid floating state of interface signal at invalid period. note (2) when the interface signal is invalid, be sure to pull down the power supply of lcd vcc to 0 v. note (3) the backlight converter power must be turned on afte r the power supply for the logic and the interface signal is valid. the backlight converter power must be turned off before the power supply for the logic and the interface signal is invalid. value parameter min typ max units t1 (0.5) - (10) ms t2 (0) - (50) ms t3 (0) - (50) ms t4 (500) - - ms t5 (20) - - ms t6 (10) - - ms t7 (5) (300) ms t8 (10) - - ms t9 (10) - - ms
product specification version 1.0 6 april 2011 18 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 7. optical characteristics 7.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v cc 3.3 v input signal according to typical val ue in "3. electrical characteristics" current i f 20 3 ma converter duty 100 % note (1) i f means the forward current of each channel 7.2 optical specifications the relative measurement methods of optical characteri stics are shown in 7.2. the following items should be measured under the test conditions described in 7.1 and stable environment shown in note (6). item symbol condition min. typ. max. unit note rx (0.606) red ry (0.342) gx (0.338) green gy (0.541) bx (0.158) blue by (0.144) wx (0.313) color chromaticity white wy typ ? 0.05 (0.329) typ + 0.05 (1), (6) center luminance of white l c (400) (500) cd/m 2 (4), (6) contrast ratio cr (550) (800) - (2), (6) t r (6) (11) ms response time t f (10) (15) ms (3) white variation w x =0 , y =0 viewing normal angle (1.25) (1.4) - (5), (6) x + (60) (70) horizontal x - (60) (70) y + (50) (60) viewing angle vertical y - cr 10 ? (50) (60) deg. (1), (6)
product specification version 1.0 6 april 2011 19 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. note (1) definition of viewing angle ( x, y): note (2) definition of contrast ratio (cr): the contrast ratio can be calcul ated by the following expression. contrast ratio (cr) = l63 / l0 l63: luminance of gray level 63 l 0: luminance of gray level 0 cr = cr (5) cr (x) is corresponding to the contrast ratio of the point x at figure in note (5). note (3) definition of response time (t r , t f ) and measurement method: 12 o?clock direction y+ = 90o 6 o?clock y- = 90o x ? x + y- y + x- y+ y- x+ normal x = y = 0o x+ = 90o x- = 90o 100% 90% 10% 0% gray l evel 63 gray l evel 0 gray l evel 63 time t r optical response t f 66.68 ms 66 . 68 m s
product specification version 1.0 6 april 2011 20 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. note (4) definition of luminance of white (l c ): measure the luminance of gray level 63 at center point l c = l (5) l (x) is corresponding to the luminance of the point x at figure in note (5). note (5) definition of white variation ( w): measure the luminance of gray level 63 at 5 points w = maximum [l (1), l (2), l (3), l (4), l (5)] / minimum [l (1), l (2), l (3), l (4), l (5)] note (6) measurement setup: the lcd module should be stabilized at giv en temperature for 20 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room. d w active area vertical line horizontal line : test point x=1 to 5 5 1 2 3 4 d/4 d/2 3d/4 w/4 w/2 3w/4 x cs -2000t 500 mm lcd module lcd p anel center of the s creen light shield room (ambient luminance < 2 l ux) usb2000
product specification version 1.0 6 april 2011 21 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 8. reliability test 8.1 reliability test condition no. test item test condition note 1 high temperature storage 80 , 240 hours j 2 low temperature storage -30 , 240 hours j 3 thermal shock storage {(-30 , 0.5 hour) ( j 80 , 0.5 hour)}, 100 cycles j 4 high temperature operating 70 , 240 hours j 5 low temperature operating -30 , 240 hours j 6 high temperature & high humidity operating 60 , 90% rh, 240hours j (1) (2) 7 shock (non-operating) 200g, 2ms, half sine wave, 1 time for x, y, z. (3) 8 vibration (non-operating) 1.5g,10~300h z,10min/cycle,3 cycles each x,y,z (3) note (1) there should be no condensation on the surface of panel during test. note (2) the temperature of panel display surface area should be 80 max. j note (3) at testing vibration and shock, the fixtur e in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. note (4) in the standard conditions, there is no function failure issue occu rred. all the cosmetic specification is judged before the reliability test.
product specification version 1.0 6 april 2011 22 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 9. packaging 9.1 packing specifications (1) 20pcs lcd modules / 1 box (2) box dimensions: 520(l)x310(w)x415(h)mm (3) weight: approximately 13 kg (20modules per box) 9.2 packing method (1) carton packing should have no failure in the following reliability test items. test item test conditions note vibration ista standard random, frequency range: 2 ? 200 hz top & bottom: 30 minutes (+z), 10 min (-z), right & left: 10 minutes (x) back & forth 10 minutes (y) non operation dropping test 1 angle, 3 edge, 6 face, 61 cm non operation figure. 9-1 packing method
product specification version 1.0 6 april 2011 23 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. figure. 9-2 packing method
product specification version 1.0 6 april 2011 24 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 10. definition of label 10.1 cmi module label the barcode nameplate is pasted on each module as illustrati on, and its definitions are as following explanation. (a) model name: g133ige -l03 (b) revision: rev. xx, for example: a1, ?, c1, c2 ?etc. (c) serial id: x x x x x x x y m d x n n n n serial id includes the information as below: (a) manufactured date: year: 1~9, for 2001~2009 month: 1~9, a~c, for jan. ~ dec. day: 1~9, a~y, for 1 st to 31 st , exclude i , o and u (b) revision code: cover all the change serial no.: manufacturing sequence of product year, month, date cmi internal use revision serial no. cmi internal use cmi internal use chi mei optoelectronics made in taiwan e207943 x x x x x x x y m d l n n n n g133ige -l03 rev.xx rohs
product specification version 1.0 6 april 2011 25 / 27 the copyright belongs to chimei innolux. any unauthorized use is prohibited. 11. precautions 11.1 assembly and handling precautions (1) do not apply rough force such as bending or twisting to the module during assembly. (2) to assemble or install module into user?s system can be only in clean working areas. the dust and oil may cause electrical short or worsen the polarizer. (3) it?s not permitted to have pressure or impulse on the module because the lcd panel and backlight will be damaged. (4) always follow the correct power sequence when lcd module is connecting and operating. this can prevent damage to the cmos lsi chips during latch-up. (5) do not pull the i/f connector in or out while the module is operating. (6) do not disassemble the module. (7) use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) it is dangerous that moisture come into or c ontacted the lcd module, because moisture may damage lcd module when it is operating. (9) high temperature or humidity may reduce the per formance of module. please store lcd module within the specified storage conditions. (10) when ambient temperature is lower than 10oc may reduce the display quality. for example, the response time will become slowly. (11) do not keep same pattern in a long pe riod of time. it may cause image sticking on lcd 11.2 safety precautions (1) do not disassemble the module or insert anything into the backlight unit to prevent electrical shock. (2) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (3) after the module?s end of life, it is not harmful in case of normal operation and storage.

▲Up To Search▲

Price & Availability of G133IGE-L03

	To Download G133IGE-L03 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .